Odor and H2S · Corrosion and Asset Life
How Does Hydrogen Sulfide Corrode Concrete?
Sulfuric acid can react with cement materials in concrete. The surface may soften, become rough, lose material, expose aggregate, and eventually uncover reinforcing steel.
Damage may be greatest above the normal flow line, near force-main discharges, and where ventilation or turbulence brings gas to a wet surface. Leakage and poor coatings can create local differences.
Do not strike or scrape a damaged structure unless the inspection plan allows it. Record photographs, location, depth measurements taken by approved methods, exposed reinforcement, leakage, and changes since the last inspection.
Also check for falling fragments, widening defects, unusual seepage, and changes near joints or supports. Keep people away from an area if the approved program identifies a concern. Tell the supervisor and qualified engineering staff promptly about possible structural damage.
Key point: Concrete loss can progress from a surface condition to a structural and service-life problem.
Keep learning
Odor Control and Hydrogen Sulfide (H2S) in Wastewater Systems
This page comes from the course. It covers where odors come from, hydrogen sulfide hazards, odor and H2S in collection systems, corrosion, gas detection and worker safety, and odor control in the collection system and at the plant, one step at a time, with short knowledge checks and a certificate of completion.
Take the course