Lift Stations · Power, Generators, and Temporary Pumping
What Is Bypass Pumping?
Temporary bypass pumping moves wastewater around unavailable station equipment or a damaged section of the collection system. It may be used during planned work or an emergency.
A bypass normally draws wastewater from an approved upstream point and discharges it into an approved downstream point or force-main connection. The path must remain contained.
Planning considers expected flow, changing peak flow, suction conditions, discharge pressure, pipe routing, backup capacity, fuel or power, monitoring, and public protection. Engineering review may be required.
Bypass pumping does not suspend permit or reporting duties. Follow the approved bypass plan, plant procedures, and directions from your permit or your state or provincial regulator.
Key point: A bypass is a temporary conveyance system that must safely carry the full expected duty assigned to it.
Keep learning
Lift Stations for Wastewater Operators
This page comes from the course. It covers pumps and level controls, inspections, alarms, power and bypass pumping, clogs, gas hazards and overflow response, one step at a time, with short knowledge checks and a certificate of completion.
Take the course